2023 Mercury 360HP APX V8 For Sale – 4.6L – 12 in. Shaft
2023 Mercury 360HP APX V8 For Sale – 4.6L – 12 in. Shaft
Model: 360 HP APX 4.6L V8
Make: Mercury
Year: 2023
Availability: In Stock
Shipping: Ready to Ship
Description
2023 Mercury 360HP APX V8 For Sale – 4.6L – 12 in. Shaft
ENGINE
| Engine Type | V8 |
| Bore x Stroke | 3.62 x 3.39 in.(92 x 86 mm) |
| Displacement | 4.6 L |
| Starting | 24V Electric Start With SmartStart Protection |
DIMENSIONS
| Shaft Length | 12 in. |
| Weight | 430 lb. |
GENERAL
| Trim Method | Power Trim And Lift With Remote Pumps |
| Propshaft Horsepower | 360 HP |
| Full Throttle Operating Range | 7000 RPM |
| Gear Ratio / Shift | 1.13:1 |
| Fuel Induction | Short-Runner Intake Manifold With Forced Cold Air Induction, Electronic Fuel Injection (EFI) Computer Controlled With O2 And Pressure Feedback |
| Alternator | 85 Amp |
| Cooling | Water-Cooled With Thermostat Control And Integrated Pressure Relief |
| Steering | Cable With Wing Plates |
DESCRIPTION
Powering Champions.
Mercury Racing is more than a name. The heat of competition warms our soul. Technology of the future excites our imagination. This passion defines the new Mercury Racing Apex Series, pure competition outboards designed to perform at the pinnacle of closed-course racing – the quickest, fastest, smartest four-stroke outboards to ever boil the water. There’s only one way to lead to the finish line. Wide Open, of course.
KEY FEATURES
- Win. Wide. Open: A 4.6-liter V8 powerhead is naturally aspirated and features deep-breathing double overhead cam/four-valve architecture with a short-runner intake manifold mated to a cold-air induction system.
- An 11:1 compression ratio boosts torque output while the 7000 RPM redline extends the power curve. A dynamic oil pickup system is designed to maintain critical engine oil pressure under high-G loads.
- A cut-down flywheel, deleted balance shaft and carbon fiber top cowl optimize weight. A competition engine calibration is optimized to take full advantage of 360 APX powerhead tuning. While bred for racing, this four-stroke powerhead is also designed to deliver unmatched durability and reduced maintenance in a competition environment.
- A digital control offers smooth and precise throttle application. The 24-volt starter produces instant dockside starting in competition. Above-water exhaust offers unrestricted flow and produces an exciting tone for racing fans.
- 12-Inch Midsection: The 12-inch midsection is designed specifically for Formula 1 tunnel boat applications, with a structural wet sump driveshaft housing and integrated power trim and lift with remote pumps.
- SSM Gearcase: An evolved Mercury Racing Super Speed Master (IV SSM) outboard gearcase is direct-drive with no neutral or reverse shifting.
- Overdrive: An overdrive spur gearset between the crankshaft and the gearcase increases the input shaft speed to the gearcase and produces the left-hand propeller rotation desired for Formula 1 circuit racing.
SPECIFICATIONS
- Full Throttle RPM: 7000 RPM
- Rated Hp: 360 HP
- Cylinders: V8
- Displacement: 4.6 L
- Shaft Length: 12″
- Trim System: Power Trim And Lift With Remote Pumps
- Mid Section: Circuit Racing Specific 12″ Mid Section Direct Mounted With Integral Trim And Lift
- Bore & Stroke: 3.62 x 3.39″ (92 x 86 mm)
- Induction System: Short-Runner Intake Manifold With Forced Cold Air Induction
- Fuel Requirement: Unleaded Premium 91 Octane Minimum (R+M/2) Or 98 RON 10% Ethanol Maximum
- Fuel System: Electronic Fuel Injection (EFI) Computer Controlled With O2 And Pressure Feedback
- Ignition System: SmartCraft PCM 112 Digital Inductive
- Charging: 85 Amp
- Starting: 24V Electric Start With SmartStart Protection
- Oil Requirement: Mercury Racing High-Performance Synthetic SAE 10W-30
- Carb Star Rating: 3-Star, EU RCD II
- Steering: Cable With Wing Plates
- Throttle & Shift Controls: Digital Throttle
- Gearcase: IV SSM
- Gear Ratio: 1.13:1
- Dry Weight: 430 lbs
- Idle RPM: 750 RPM
- Max Trim Range: 13 deg.
- Lift Range: 26 mm
- Cooling System: Water-Cooled With Thermostat Control And Integrated Pressure Relief
- Engine Management System: Competition Spec SmartCraft PCM 112
- Engine Protection System: SmartCraft Engine Guardian With Competition Calibration
- Exhaust System: Above Water
- Lubrication System: Structural Wet Sump With Integrated Baffle System And Oil Cooler
- Oil Capacity: 6.6 L
- Steering Angle: + 30 deg. / – 30 deg.
- Overdrive Ratio: 0.714 (35:25) / 0.739 (23:17)
- Overall Drive Ratio: 0.809 / 0.837
Mercury 360HP APX V8 For Sale Mercury 360HP APX V8 For Sale Mercury 360HP APX V8 For Sale Mercury 360HP APX V8 For Sale Mercury 360HP APX V8 For Sale Mercury 360HP APX V8 For Sale
Be the first to review “2023 Mercury 360HP APX V8 For Sale – 4.6L – 12 in. Shaft”
Reviews
There are no reviews yet.